WIRELESS SETTINGS
Wireless Settings
If a wireless LAN USB adapter is connected to the machine, it provides access to a network using a wireless LAN. Clicking the [Submit] button stores the settings.
To configure wireless settings, a wireless LAN USB adapter must be installed.Wireless Settings
Used to enable or disable the wireless LAN and show the status of wireless LAN.
Connection Type Switching
Switches between wireless and wired.Current Setting
Shows settings, such as the SSID of a wireless LAN and security type. If the wireless LAN is disabled, "--" appears.Current Wireless Status
This shows reception levels (Max. 100) of the wireless LAN and IP addresses.Show Wireless Setting Screen
Click the [Setup] button.In the Wireless Setting screen, you can configure the SSID of a wireless LAN, Security Type, Encry., and Security Key.
Initialize Wireless Settings
Click the [Initialize] button.The settings for SSID, Security Type, Encry., and Security Key are initialized.
Wireless Setting Screen
Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key.
Clicking the [Submit] button stores the settings.
Clicking the [Submit] button stores the settings.
SSID
Enter an SSID using up to 32 characters.Security Type
Select a security type.Encry.
Select an encryption type.Security Key
Enter a security key.| Security Type | Security Key |
|---|---|
| WEP 64bit | 5 characters or 10-digit hexadecimal number |
| WEP 128bit | 13 characters or 26-digit hexadecimal number |
| WAP/WAP2 | 8 to 63 characters or 64-digit hexadecimal number |